Lenovo a30 8191 ユーザーガイド
4.
Remove the metal shield from the drive bay by inserting a flat-blade
screwdriver into one of the slots and gently prying it loose.
screwdriver into one of the slots and gently prying it loose.
5.
Make sure the drive that you are installing is set correctly as either a master or
a slave device.
a slave device.
v
If it is the first CD drive or DVD drive, set it as a master device.
v
If it is an additional CD drive or DVD drive, set it as a slave device.
v
If it is an additional hard disk drive, set it as a slave device.
Refer to the documentation that comes with your drive for master/slave
jumper information.
jumper information.
6.
Install the drive into the bay. Align the screw holes and install two screws to
secure the drive.
secure the drive.
Chapter 3. Types 2296 and 8434
61