Sceptre x32bv-naga ユーザーガイド
SCEPTRE X32 HDTV User Manual
- 22 -
www.SCEPTRE.com
If You Have Cable or Antenna through VCR…
1.
Make sure the power of X32 LCD HDTV is turned off.
2.
Make sure there is an antenna or cable connection to the VCR already.
3.
Use a Coaxial RF cable and connect from your VCR’s video out to the
TV port on the back of your X32 LCD HDTV.
TV port on the back of your X32 LCD HDTV.
4.
Turn on X32 LCD HDTV.
5.
Select TV for digital cable or antenna from either your remote control’s
source button or source button on the right side of the TV.
source button or source button on the right side of the TV.
6.
Use the On Screen Display to scan for channels.
Please Note :
•
Some VCRs require you to turn it on before its output will have
a signal to the TV. Please consult your VCR manual for
further reference.
a signal to the TV. Please consult your VCR manual for
further reference.
•
Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
your local broadcasting stations for more information.
•
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.