Targus pa610u ユーザーガイド
Quick Start
Pocket PCs
3
4
Run
SETUP
from the CD-ROM.
NOTE: If asked to confirm file replacing, choose Yes to All.
5
When downloading is complete, click OK.
6
Reset your Pocket PC to load the new software.
7
When Setup is complete, click OK and remove your
Pocket PC from its cradle.
Pocket PC from its cradle.
8
Plug the LP-E Card into an active Ethernet connection.
9
Insert the LP-E Card into your Pocket PC’s
CompactFlash I/O card slot.
CompactFlash I/O card slot.
When your Pocket PC displays the following message,
tap OK.
tap OK.
10
Use the IP Address screen to configure your network
settings, then tap OK.
settings, then tap OK.
11
Remove the LP-E Card, then reinsert it and connect the
cable to your network.
cable to your network.
CAUTION: The new IP settings will not take effect until you
reinsert the card.
reinsert the card.