Grandstream ht-503 ユーザーズマニュアル
Grandstream Networks, Inc.
HT503 User Manual
Page 17 of 37
C
ONFIGURATION
G
UIDE
C
ONFIGURING
HT503
THROUGH
V
OICE
P
ROMPT
DHCP
M
ODE
Follow Table 3 with voice menu option 01 to enable HT503 to use DHCP.
S
TATIC
IP
M
ODE
Follow Table 3 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02,
03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively.
03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively.
TFTP
S
ERVER
A
DDRESS
Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server.
F
IRMWARE
S
ERVER
IP
A
DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C
ONFIGURATION
S
ERVER
IP
A
DDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
U
PGRADE
P
ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
between TFTP and HTTP.
F
IRMWARE
U
PGRADE
M
ODE
Select voice menu option 17 to choose firmware upgrade mode. There are three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
Firmware 1.0.0.9
Last Updated: 9/2007