Pantech link ユーザーズマニュアル

02
03
04
05
06
07
08

01

14 

When you subscribe to your network operator, you receive a SIM 

(Subscriber Identity Module) card containing your registration

information, PIN code, etc. 

Like a credit card, it should be kept secure and handled carefully. 

Do not bend, scratch or expose it to moisture. Avoid static

electricity. 

To avoid corrupting your SIM card’s memory, always switch off 

your phone before removing or inserting your SIM card.

Your phone uses a Li-Ion battery. Make sure to use an authorized

battery and charger only. For more details, please inquire at your 

nearest dealer.

note: Your phone is powered by a Lithium Ion (Li-Ion) battery. Unlike

other forms of battery technology, you can recharge your battery while 

some charge remains without reducing your phone’s autonomy due to the 

“battery memory effect” inherent in those technologies.

1. Remove the battery cover from the unit.

2. To fit the battery cover, put it on the

guide rail and push up.

3. Insert the SIM card into the slot. The 

gold contacts of the SIM card should go 

against the metal contacts of the phone.

  Put the contacts of the battery into the  

hole located at the bottom of the unit 

insert and press the upper side of the 

battery until you hear the “click”. Make 

sure you align the gold contacts at the 

battery end with contacts on the phone. 

If the contacts at the battery are not 

properly aligned, damage could occur to 

the phone and the battery.

4. To remove the battery push the bottom

of the battery to upwards (1) and

remove (2) the battery. Push the SIM

card in the direction of the arrow as 

shown.

1. To charge, open the protective cover

on the top  right side and connect the 

charger adapter.  

Make sure you align the connector 

as shown in the image. If not, it will 

damage the charging connector on 

the phone and will not charge.

2. To remove the adapter connection

press the adapter’s side buttons (1)

and pull the adapter away (2).

 

 

1. Press and hold E.

1. Press and hold E.