Uniden d2280-2 ユーザーガイド

ページ / 28
English - 1
Multihandset Features
To use the features in this section, you need at least 2 
handsets.
Your base supports a total of 12 cordless handsets: the one that 
came with the base and up to 11 accessory handsets. Your base also 
supports a total of 2 DRX100 range extenders, including any that 
came with your phone.
You must register accessory handsets to the base before using them. 
(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a Not Registered message. 
For registration instructions, see p. 24, or see the accessory handset 
manual.
If a handset was ever registered to a base, you must reset it before 
it can register to a new base; see p. 24, or see the accessory handset 
manual.
Conference Calling
When an outside call comes in, four handsets can join in a 
conference call with the outside caller. 
To join a call that’s already in progress, just press 
Talk
 or 
sPEakER
To leave the conference call, hang up normally; the other handset 
remains connected to the call. 
Call Transfer
To...
Press...
transfer a call
inTERcOM/clEaR
. The phone puts the call on hold and 
prompts you to select the handset you want to page. 
When the other handset accepts the call, you'll be 
disconnected (press 
Talk
 to rejoin the call).
cancel a transfer
Talk
 to return to the call. 
accept a 
transferred call
inTERcOM/clEaR 
to answer the page and speak to the other 
handset. Then, press 
Talk 
to speak to the caller.
Privacy Mode
To activate privacy mode on a call in progress, press 
MEnu/sElEcT
 
twice. As long as privacy mode is on, you'll see a   in the display, 
and no other handsets can join your call. Privacy mode turns off