Uniden d2280-2 ユーザーガイド

For more details, see the 

Important Information section.

Unpack all handsets,  

battery 

packs, and 

battery 

covers. If 

you need 

to remove 

a cover, press in on the notch 

and slide the cover down and 

off.
Line up the battery connector 

with the jack inside the 

handset; the connector only fits 

one way. 
Push the connector in until 

it clicks into place; tug gently 

on the wires to make sure the 

battery is securely connected.
Replace the battery cover and 

slide it into place.
Use an AC adapter to connect 

the power jack on the base to 

1.

2.

3.

4.

5.

a regular indoor (120V AC) 

power outlet. Connect any 

chargers the same way. 
Place a handset in the base with 

the display facing forward. If 

the display doesn’t light up, 

reseat the handset or connect 

the base to a different outlet. 

For 2 or more handsets, place 

each handset in a charger. 

Use the telephone cord to connect 

the 

 jack on the base to a 

standard telephone wall jack.

Pick up the handset and press 

. The handset sounds a dial 

tone, and the display shows 

. 

If you don't hear a dial tone or 

the display says 

check the connection between 

the base and the phone jack. 

Make a quick test call. (Press 

 to hang up.) 

If you keep hearing a dial tone, 

change to pulse dialing.
If there’s a lot of noise, check 

for interference (see p. 22). 

Test all handsets the same way. 

If you can't get a dial tone, 

move the handset closer to the 

base. 

6.



1.

–

2.

–

–

3.