Uniden dxi5186-2 ユーザーガイド

www.uniden.com

The cordless phone
features include
AutoTalk

and

.

AutoStandby allows you
to hang up by simply
returning the handset to
the main base or
charging cradle.

Setting Menu Display Options

There are five setup options, AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code,
Dial Mode and Language.

CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set
by using Handset 2, you will not see these options listed on the LCD screen.
To confirm which handset is HS1, refer to the display indicating 

HS1

or 

HS2

.

AutoTalk, Area Code and Language options can be set by using
either Handset 1 or Handset 2.

1) Press and hold call id/menu. The following screen appears.

2) Use vol/

or vol/

to move the pointer to the

selection that you would like to change.
Press select/channel  to toggle between 

On

and 

Off

.

3) Press end  and return the handset to the main base unit to complete the setting.

The handset returns to standby mode.

AutoTalk allows you to answer the phone without pressing the talk/flash key. 
If the phone rings when AutoTalk is on, simply remove the handset from either
charging cradle and the phone automatically answers the call. If the phone rings
when AutoTalk is off, you must press talk/flash to answer the call. 

If you enter a 3-digit area code number in the 

Area  Code

option, your local area

code does not appear in Caller ID messages. Do not program this option if your 
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.