Uniden dxi5186-2 ユーザーガイド

www.uniden.com

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

The charge/in use or
charge LED won't
illuminate when the
handset is placed in 
the main base or charging
cradle.

The audio sounds weak
and/or scratchy.

Can't make or receive calls.

• Make sure the AC adapters are plugged into each charging cradle and 

wall outlet.

• Make sure both handsets are properly seated in each charging cradle.

• Make sure the charging contacts on the handsets, main base and 

charging cradle are clean.

• Move the handset and/or main base to a different location away from

metal objects or appliances and try again.

• Press select/channel to help eliminate background noise.

• Make sure that the handset is not too far from the main base.

• Re-register both handsets (see page 14).

• Check both ends of the base telephone line cord.

• Make sure the AC adapter is plugged into the main base and wall outlet.

• Disconnect the AC adapter for a few minutes, then reconnect it.

• Make sure that you are not too far from the main base.

• Check the dialing mode.