Uniden exl8900 ユーザーガイド
16
Storing mixed tone/pulse number
If your have selected pulse dialing, you can store a mixed
tone/pulse number (up to 20 digits) for memory dialing.
tone/pulse number (up to 20 digits) for memory dialing.
1
Remove the handset from the base
and press . The talk/batt
LED flashes and you hear a beep.
and press . The talk/batt
LED flashes and you hear a beep.
2
Enter the number to be dialed in
pulse mode.
pulse mode.
3
Press the button on the
handset. The button counts
as one digit and also enters a pause.
handset. The button counts
as one digit and also enters a pause.
4
New enter the number(s) to be dialed
in tone mode.
in tone mode.
5
Press and a number (0-9) on
the keypad for the memory location
you wish to use. You will hear a long
beep and the talk/batt LED goes out.
the keypad for the memory location
you wish to use. You will hear a long
beep and the talk/batt LED goes out.
mem
/tone
*
/tone
*
mem
Dialing a stored number
To dial a phone number stored in
memory, press , then press
and the memory location (0-9). Your
phone will dial the stored number.
memory, press , then press
and the memory location (0-9). Your
phone will dial the stored number.
mem
talk
mem
talk
If you select a memory
location that does not
have a stored number, the
handset will beep rapidly
and the phone will not
dial.
location that does not
have a stored number, the
handset will beep rapidly
and the phone will not
dial.
If you press
instead of , the
LDM will be activated.
(See page 14 for details.)
instead of , the
LDM will be activated.
(See page 14 for details.)
LongDst
talk
EXL8900 6th HEN 99.8.20 2:23 PM Page 19