Uniden bc60xlt-1 ユーザーガイド
Feature Highlights
30 Channels – Program one frequency into each
channel. You must have at least one channel
programmed to use the Scan mode.
channel. You must have at least one channel
programmed to use the Scan mode.
29 MHz-512 MHz – Search these frequency
ranges with your scanner. (The frequency
coverage is not totally continuous from 29 MHz to
512 MHz.)
ranges with your scanner. (The frequency
coverage is not totally continuous from 29 MHz to
512 MHz.)
Chain Searching – You can define five different
personal search bands, and search up to all five
chain locations at once.
personal search bands, and search up to all five
chain locations at once.
Priority Channel Scanning – Allows you to
designate a priority channel which is monitored
every two seconds when Priority Scanning is
selected.
designate a priority channel which is monitored
every two seconds when Priority Scanning is
selected.
Manual Channel Access – Go directly to any
channel.
channel.
Memory Backup – Frequencies programmed in
channels are retained in memory. If power is
completely disconnected, the frequencies are
retained for one hour.
channels are retained in memory. If power is
completely disconnected, the frequencies are
retained for one hour.
Weather Scan – Use as a weather information
radio.
radio.
Preset Two-second Delay – Scanner waits two
seconds after transmission stops before resuming
scanning.
seconds after transmission stops before resuming
scanning.
LCD Back Light – An orange LCD light remains
on for 15 seconds when
on for 15 seconds when
l
is pressed.
4