Uniden udw10003 ユーザーズマニュアル

13

Your receiver supports a total of four active cameras at a time. You can mix and match any of the 
accessory cameras. (See our website for compatible camera options.)

Pairing is like introducing the camera and the receiver so they can communicate. You’ll perform the 
pairing procedure if you want to add a new camera to your system or if you are having trouble with 
a camera.

Make sure the camera is powered on.
On the receiver, open the menu and scroll down to Pair CAM. 
Use 

 or 

 to highlight the channel you want to use for this camera.

Press 

. The receiver goes into pairing mode for 60 seconds.

On the camera, press the 

 or 

 button to put it into pairing mode, also. The position of 

this button varies from camera to camera; see the manual that came with your camera.
On the receiver, open the menu. 
Scroll down to CAM1 through CAM4 and select the channel assigned to the new camera. 
Use 

 or 

 to enable the channel (set it to On). 

Press 

 to cycle through the channels, and verify that the video signal from the new camera 

appears on the correct channel.

As soon as the receiver detects a camera in pairing mode, it links to that camera and assigns it to 
the selected channel. 
If a camera is already assigned to the selected channel, the receiver overwrites that camera link 
with the new one.
Make sure you enable the channel after you pair the camera. If a channel is set to Off, the receiver 
skips that camera during a scan and leaves that camera’s position blank in quad view.
Only pair one camera at a time! The receiver links to the first camera it detects. If two or more 
cameras are in pairing mode, you can't control which camera the receiver will detect first.

1.
2.
3.
4.
5.

6.
7.
8.
9.

►

►

►

►