EchoStar t-333 mhp ユーザーガイド

 

 

Safety First 

 

 

This digital decoder has been manufactured to meet 
international safety standards. However, safety precautions 
must be followed to ensure the safe and reliable operation 
of the decoder.   

Please take note of the following guidelines to avoid the 
risk of an electric shock.  

  This decoder operates with an external power supply 

in the range of 100 to 240V AC, 50/60 Hz. Use a 
standard AC wall outlet; a DC power source cannot 
be used. Remember that contact with 110-240 Volts 
AC power supply can be lethal. 

  Ensure that all electrical connections are properly 

made before connecting the decoder to the power 
supply. Always unplug the decoder before connecting 
or disconnecting any cables.   

  Whenever you connect the decoder to the power 

supply, always connect the power lead to the power 
input connector on the back panel of the decoder 
before you connect the power brick to the wall socket 
outlet.    

  Whenever you disconnect the decoder from the 

power supply, always remove the power brick from 
the wall socket-outlet before you remove the other 
end of the lead from the power input connector on 
the back panel of the decoder. 

  Never attempt to repair or reconstruct the decoder 

yourself. A serious electric shock may occur if this 
decoder is repaired, disassembled or reconstructed 
by an unauthorized person.   

  Be extremely careful if this unit is in contact with 

water. Immediately disconnect the power brick if 
possible. 

 

  If anything falls into the cabinet, unplug the decoder 

and have it checked by a qualified technician.  

  Allow adequate air circulation to prevent internal heat 

build-up. Do not place the unit next to a radiator or 
any heat source and make sure that the air vents are 
not covered.  

 
DO NOT 

× 

… expose the decoder to extreme temperatures, 
direct sunlight or high humidity.  

× 

… place any objects on top of the decoder in order to 
allow air circulation.  

× 

… place the decoder on fabric furnishings, carpets or 
other flammable materials. 

 

Unpacking Your Digital Decoder 

As you unpack your digital decoder, please make sure that the following accessories are included:  

 
 

 

 

 

 

 

 

 

 

 

 

Decoder Remote 

Control 

Power brick 

SCART 

cable 

Telephone 

modem cable 

RF coaxial cable 

Batteries 

 
 

Maintenance 

If you wish to clean your box, disconnect it first of all from the power supply. To clean the box, use a soft, dry cloth. For 
very dirty surfaces, dip a soft cloth in a weak soap-and-water solution and wring well. After cleaning, wipe with a soft, dry 
cloth. Never use alcohol, paint thinner, or a chemically treated cloth to clean this unit. Such chemicals may damage the 
unit’s finishing.