EchoStar d-2510 ip viaccess ユーザーズマニュアル

13

Move the dish a few counts to the west by pressing the   key and press the OK key to store east limit in this p
osition. The indicated number will be set at 1000 and the highlight will be moved down to the “West Limit” li
ne. Now set the west limit by moving the dish using the   key until you have reached the dish limit. The indica
ted number will increase from 1000.  Move the dish back a couple of counts using the   key and press the OK
key to store the west limit.

If either the numeric value is not shown or the message
“...Motor Error...” is displayed on the lower part of the s
creen, then ;

Press the   key on the “East Limit” parameter line.
The initial value of 5000 will decrease as the dish i
s moved. Keep moving the dish unit until the east li
mit is reached. If the dish moves to the west when
you press the  key, reverse the motor wires.

First the east and west limits have to be set before
any satellites can be programmed.

The dish limits are now stored in the receiver and t
he dish is in the most western position. Press the  S
AT key to start the “Auto Sat” function or you can
press MENU to program the satellites manually.

1) an error occurred when moving the dish(which could be caused by e.g. loose wires), or

2) the dish has reached its east limit.  In this case continue with the installation procedure.

×      Not Se t    Ø

Press SAT to go to the Auto SAT feature.
Press menu if you want to program the satellites manually.
Press Exit to return to TV/Radio channel.

Now press the   or   key to select the most western
position you can receive.

Press the OK  key.

Select the Position option and move the dish using
the   key to correct location of the western satellite.
Peak the dish to obtain the highest signal quality
using the  and   keys. Then press the  OK key to
store this setting.

×        INTEL705         Ø