Yamaha RX-V1065 ユーザーガイド

■ Aspect

Sets a horizontal to vertical ratio (aspect ratio) of images 
reproduced by HDMI signals output from the HDMI OUT 
jack when the HDMI signals are converted from analog 
video input signals by a video conversion function.

• You cannot change the aspect ratio of the screen when “Resolution” is set 

to “Through”.

• This setting is not effective for inputs with the aspect ratio other than 4:3.
• You cannot obtain an effect of the aspect ratio when visual signals are 

input from the HDMI 1-4 jacks or when 720p, 1080i or 1080p signals are 
input.

You can set items for a video monitor and the front panel 
display.

Sets brightness of the front panel display. As the value is 
lowered, the brightness of the front panel display is 
darkened.

• The brightness of display does not become bright in Pure Direct mode 

even if the value is increased.

Selects the way to scroll the screen when a total number of 
characters exceed a display area of the front panel display.

Adjusts the position of the GUI screen displayed on the 
video monitor. To move the screen up (or to the right), set 
this value larger. To move the screen down (or to the left), 
set this value smaller.

You can set items for volumes.

■ Adaptive DRC

Adjust the dynamic range in conjunction with the volume 
level. This feature is useful when you are listening at 
lower volumes or at night. When this function is enabled, 
the dynamic range is adjusted as follows.
When the volume level is low: narrow the dynamic range
When the volume level is high: widen the dynamic range

y

• This setting is also effective for headphones.

■ Max Volume

Sets the maximum volume level so that the volume will 
not be accidentally increased. For example, you can adjust 
the volume between –80.0 dB and –5.0 dB (or Mute) when 
you set this parameter to “–5.0dB”. The volume increases 
to the maximum level when this parameter is set to +16.5 
dB (default).

■ Initial Volume

Sets the volume at the time this unit is turned on. When 
this parameter is set to “Off”, the volume level used when 
this unit was set to standby is applied.

• When you set “Max Volume” and “Initial Volume” the setting of “Max 

Volume” becomes effective. For example, when you set “Max Volume” 
to “–30.0dB” and “Init. Volume” to “0.0dB”, the volume is 
automatically set to “–30.0dB” at the next time this unit is turned on.

Choices:  Through*, 16:9, Smart Zoom

Through

Outputs the video signals without changing 
the aspect ratio.

16:9

Outputs the video signals that displays 4:3 
images on a 16:9 TV with black bands on 
the right and left sides of the TV screen.

Smart Zoom Outputs the video signals that displays 4:3 

images on a 16:9 TV by stretching right and 
left of images to fit on the TV screen.

Adjustable range:  –4 to 0*

Choices:  Continuous*, Once

Continuous

Repeatedly displays all characters by 
scrolling.

Once

Displays all characters by scrolling once, 
halts scrolling and then displays first 14 
characters.

Adjustable range:  –5 to 0* to +5

Choices:  Auto, Off*

Auto

Adjusts the dynamic range automatically.

Off

Not adjust the dynamic range automatically.

Adjustable range:  –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)