Yamaha RX-V450 オーナーマニュアル

A

Outputs audio signals for private listening with 
headphones. When you connect headphones, no signals 
are output to the OUTPUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down 
to the left and right headphone channels.

B

Turns on or off the set of front speakers connected to the A 
and/or B terminals on the rear panel each time the 
corresponding button is pressed.

C

Switches the function of PRESET/TUNING l / h 
(LEVEL –/+) between selecting preset station numbers 
and tuning.

D

Switches the sound fields off or on. When STRAIGHT is 
selected, input signals (2-channel or multi-channel) are 
output directly from their respective speakers without 
effect processing.

E

Use to adjust the bass/treble balance for the front left and 
right speakers (see page 26).

F

Use to adjust the bass/treble balance for the front left and 
right speakers (in conjunction with CONTROL).

G

l 

h

Use to select sound field programs (see page 26).

H

Sets the priority (AUTO, DTS, ANALOG) for the type of 
signals received when one component is connected to two 
or more of this unit’s input jacks (see page 31).

I

Selects the input source you want to listen to or watch.

J

Selects the source connected to the MULTI CH INPUT 
jacks. When selected, the MULTI CH INPUT source takes 
priority over the source selected with INPUT (or the input 
selector buttons on the remote control).

00_RXV450_U_EN.book  Page 5  Monday, February 16, 2004  7:03 PM