Yamaha P-120 ユーザーガイド

P-120/P-120S

The Dual Mode

To activate the dual mode simply press two voice selectors at the

same time (or press one voice selector while holding another). The voice
indicators of both selected voices will light when the dual mode is
active. To return to the normal single-voice play mode, press any single
voice selector.

According to the voice numbering priority as shown in the diagram

on the right, lower valued voice numbers will be designated as the 1st
Voice (the other voice will be designated as the 2nd Voice).

• The dual and split modes cannot be engaged at the same time.

•

[VARIATION] in the Dual Mode

The [VARIATION] button’s indicator will light if the variation is engaged for
either or both of the dual-mode voices. While the dual mode is engaged,
the [VARIATION] button can be used to turn the variation for both voices
on or off. To turn the variation on or off for only one of the voices, hold the
voice button of the other voice and press the button of the voice for which
you want to change the variation then press the [VARIATION] button.

•

[EFFECT] in the Dual Mode

Depending upon the conditions one effect type will take priority over the
other. Depth will be decided according to the depth default value of the
voice combination. However, using function F3 (see page 32) you can
change the depth value for each voice as you like.
Effect depth setting via the panel controls the [–/NO

▼

] or [+/YES

▲

] but-

tons while holding the [EFFECT] button — see page 21) will be applied to
the 1st Voice only.

•

[REVERB] in the Dual Mode

The reverb type assigned to the 1st Voice will take priority over the other.
(If the reverb is set to OFF, the 2nd Voice’s reverb type will be in affect.)
Reverb depth setting via the panel controls (i.e. pressing the [–/NO

▼

] or

[+/YES

▲

] buttons while holding the [REVERB] button — see page 20) will

be applied to the 1st Voice only.

Other Dual Mode Functions

...............................

The P-120/P-120S Function mode provides access to a number

of other dual-mode functions, listed below. See the corresponding
pages for details.

• Dual Balance ........................................32
• Dual Detune..........................................32
• 1st Voice Octave Shift...........................32
• 2nd Voice Octave Shift..........................32
• 1st Voice Effect Depth...........................33
• 2nd Voice Effect Depth .........................33
• Reset ....................................................33

The dual mode makes it possible to play two voices simultaneously across the

entire range of the keyboard.

Voice numbering priority

NOTE