Zotac ZBOX HD-ID41 Plus ユーザーガイド

ZOTAC ZBOX

Setting up your ZOTAC ZBOX

You need to connect peripherals before using your ZOTAC ZBOX.

1. Connecting to USB 3.0 devices

Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to
the USB 3.0 port on the system rear panel.

2. Connecting to a network device

Connect one end of a network cable to the LAN port on the system rear panel and
the other End to a hub or switch.

3. Connecting to USB 2.0 devices

Connect USB devices like wired/wireless keyboards (varying with areas), mouse
devices and printers to the USB ports on the system rear panel.

4. Connecting to a DVI or VGA display

Connect one end of a DVI/VGA cable to an HDTV or monitor, and the other end

to the DVI port on the system rear panel. If using a VGA connection, please use

included DVI-to-VGA adapter.

5. Connecting to an HDMI display

Connect one end of an HDMI cable to the HDMI port on the system rear panel and

the other end to a HDMI-compatible display such as an HDTV or monitor.

6. Turning on the system

Connect the supplied AC adapter to the DC IN jack on the system rear panel and

then press the power switch on the front panel to turn on the system.



When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the

AC outlet to save on power consumption.