Zon legacy elite special4 ユーザーガイド

G U I T A R S

G U I T A R S

ZP-3D

Class A design with studio-grade compo-

nents on a printed circuit board

Active master volume, pickup blend, mag-

netic/piezo blend

Bass, treble and internal midrange boost/cut

with center frequency switch for mids and treble

Level, bass, and treble gain controls

Output level -10dBm

One 9-volt battery

Battery life expectancy: 200 hours continuous use

About the system

Volume control. Unlike passive volume controls which decrease the

volume by shorting some of the signal to ground, causing degradation

in tone, the active volume control on the ZP3 allows the volume to be

set to any level without overall loss of highs or tonal change. Play a

note, let it ring while slowly turning this control up and down, you’ll hear

no change in tone.

Pickup blend control. Buffered inputs provide exacting control over

blending the neck and bridge magnetic pickups. This feature allows

even the most subtle blend, for a greater variety of tone. Turning the

control clockwise brings in the bridge pickup. Turning the control coun-

terclockwise brings in the neck pickup. The detent, or “click,” in the cen-

ter of the control is the point where both pickups are on equally.

Bass control.15dB boost or cut of bass at a center frequency of 30Hz.

Turning the control clockwise boosts the bass. Turning the control coun-

terclockwise cuts the bass. The detent, or “click,” in the center of the

control is the “flat” position, zero boost or cut.

Treble control. 15dB boost or cut of treble at a center frequency deter-

mined by the switch selection. Turning the control clockwise boosts the

treble. Turning the control counterclockwise cuts the treble. The detent,

or “click,” in the center of the control is the “flat” position, zero boost or

cut.

Piezo blend control. Provides the ability to continuously blend the sig-

nal from piezo bridge and the magnetic pickups. Turning the control

clockwise alters the balance between piezo and magnetic pickups by

emphasizing the magnetic signal while de-emphasizing the piezo.

Turning the control counterclockwise de-emphasizes the magnetic pick-

ups while emphasizing the piezo.