Zonet zsr0104cp ユーザーズマニュアル

Page

Step 4. To obtain new IP settings from WPD –140, run “ipconfig / renew.” As listed below, the

IP address is your client computer’s LAN IP address, and the Default Gateway is

ZSR0104C SERIES IP address. Make sure that your IP Address is 192.168.1.xxx (xxx

ranges from 2 to 254), your Subnet Mask is 255.255.255.0, and your Default Gateway is

192.168.1.1. These values confirm that your ZSR0104C SERIES is functioning. (Figure

A-44)

Figure A-44

4. For Mac

The instructions are based on Mac OS 8.5. It is similar to Mac OS 7.x and above. Follow the steps

to verify IP settings.

Step 1. Pull down the Apple Menu. Go through “Control Panel→TCP/IP.”

Step 2. The new IP settings will be displayed in the TCP/IP window. Make sure that your IP

address is 192.168.1.xxx (xxx ranges from 2 to 254), your Subnet Mask is 255.255.255.0,

and your Default gateway is 192.168.1.1. These values confirm that your ZSR0104C

SERIES is functioning. The IP address is your LAN client’s IP address, and the Default

Gateway is ZSR0104C SERIES IP address.