Zhone 1740 shdsl ユーザーズマニュアル
1740 SHDSL 2/4-Wire Router User’s Guide
3.2.1
Bridge Mode: Service for One Fixed IP Address
To configure one static IP address, you need to set up the VC in RFC 1483 bridged mode. The router has
a default Virtual Channel (VC) of 0/33. It can function without other modifications.
a default Virtual Channel (VC) of 0/33. It can function without other modifications.
STEP 1: Click WAN Setup on the Basic menu bar, and enter values for: VPI, VCI, Encapsulation (LLC or
VC MUX).
VPI
Enter a value for the vitual path identifier
VCI
Enter a value for the virtual channel identifier
LLCEncapsulation: With LLC encapsulation, a link control header is added to the Ethernet
packet that identifies the protocol type (Ethernet). This allows multiple
protocols to be transmitted over the ATM Virtual Circuit.
protocols to be transmitted over the ATM Virtual Circuit.
VC Multiplexing:
With VC Multiplexing, no link control header is needed as the ATM
Virtual Circuit is assumed to be carrying a single protocol.
Virtual Circuit is assumed to be carrying a single protocol.
Enable NAPT
This function cannot be set for bridge mode.
STEP 2: Click on RFC 1483 Bridged.
STEP 3: Click on the Add button. The new VC is added in the Current ATM PVC List on the bottom
screen.
16 July 2004 1740-A2-GB20-00