Zhone 1752 shdsl ユーザーズマニュアル

10. Click on 

 to restart the PC and complete the TCP/IP installation. 

11.  After restarting your PC, open the Control Panel window, and then click on the Network 

icon. 

12.  Select the network component labeled TCP/IP, and then click on 

.  

13.  If you have multiple TCP/IP listings, select the listing associated with your network card 

or adapter. 

14. In the TCP/IP Properties dialog box, click on the IP Address tab. 

15.  Click in the radio button labeled Use the following IP address and type 192.168.1.x 

(where x is any number between 3 and 254) in the IP Address field. Type 255.255.255.0 
in the Subnet Mask field. 

16. Click on 

 twice to confirm and save your changes. You will be prompted to 

restart Windows. Click on 

 and restart your PC again. 

 

1.  In the Windows NT task bar, click on the Start button, point to Settings, and then click on 

Control Panel. 

2. In 

the 

Control Panel window, double click on the Network icon. 

3. In 

the 

Network dialog box, click on the Protocols tab. 

4.  The Protocols tab displays a list of currently installed network protocols. If the list includes 

TCP/IP, the protocol has already been enabled, in which case you can skip to Step 12. 

5. If 

TCP/IP does not appear as an installed component, click on 

. 

6. In 

the 

Select Network Protocol dialog box, select TCP/IP, and then click on 

. 

7.  You may be prompted to install files from your Windows NT installation CD or other 

media. Follow the instructions to install the files. 

8.  After all files are installed, a window displays to inform you that a TCP/IP service called 

DHCP can be set up to dynamically assign IP information. 

9. Click 

on 

 to continue, and then click on 

 if prompted to restart your 

computer. 

10.  After restarting your PC, open the Control Panel window, and then double-click on the 

Network icon. 

11. In the Network dialog box, click on the Protocols tab. 

12. In the Protocols tab, select TCP/IP, and then click on 

. 

13. In the Microsoft TCP/IP Properties dialog box, click in the radio button labeled Use the 

following IP address and type 192.168.1.x (where x is any number between 3 and 254) 
in the IP Address field. Type 255.255.255.0 in the Subnet Mask field. 

14. Click on 

 twice to confirm and save your changes, and then close the 

Control Panel. 

1752-A2-GB20-00                                                         June 2005      

21