Zhone 1752 shdsl ユーザーズマニュアル

10 and 100,000 seconds. The default value is 300 seconds. If to change the filter age, 

input the seconds desired in the filter age field, and then clock on 

 to submit 

your setting. 

11.  Traffic Class setting which is the status of traffic class mapping. If to set traffic class, 

select your option from the drop-down list and click on 

 to submit your 

setting. The following table gives the range of values for each option which can be 
specified with this command and a default value. 

Option 

Description 

Default value 

enable 

Enable the mapping of regenerated 
priority to its traffic class. 

disable 

Disable the mapping of regenerated 
disable priority to its traffic class. 

prioritybased 

Traffic class mapping would happen only if 
traffic class has not been already set.  

disable 

Following figure displays the VLAN settings for the bridge. 

 

The following VLAN information is displayed: 

1.  VLAN version: IEEE 802.1q version number that this device supports, which is 1. 

2.  Max VLAN Id: The maximum VLAN Id for a VLAN in the bridge. 

3.  Max VLANs: The maximum number of VLANs supported in the bridge. 

4.  Current VLANs: The number of VLANs that are currently existing in the bridge. 

Following figure displays the spanning bridge settings for the bridge. 

66                                                                              June 2005                                                              1752-A2-GB20-00