Zhone bsx8000 インストール手順
BSX8-A2-GZ40-20
June 2005
9
NMS Management Configuration
Use the Management Configuration screen to set the unit’s IP address and other
management parameters.
management parameters.
Procedure
To configure management parameters:
1. From the home screen, click on the Management Config button. The
Management Configuration screen appears.
2. Select or enter the following parameters:
Parameter
Description
IP Address
Specify the management IP address for the DSLAM.
Subnet Mask
Specify the subnet mask for the IP address.
Gateway
Specify the first-hop gateway address.
EtherType
Select the type of packets supported by your router.
This is used only for backbone VLAN (Q in Q) traffic.
This is used only for backbone VLAN (Q in Q) traffic.
Inband MGMT
Check this box if you will use inband management
(that is, you will allow the device to be contacted by
ports other than the MGMT port)..
(that is, you will allow the device to be contacted by
ports other than the MGMT port)..
VLAN Id
Specify a VLAN identifier for inband management.
Priority
Specify a priority (0–7) for inband management traffic.