Zhone 2000 ユーザーガイド
78
2 0 0 0 - A 2 - G B 2 3 - 0 0
Figure 4.47
Copper Mountain FRF.12 Configuration Menu Proprietary for
CopperMountain DSLAMs
Each option on this menu is described in detail below.
Enable/Disable Copper Mountain Fragmentation
1
Type “1” to display a prompt that lets you enable or disable
CopperMountain fragmentation.
2
Type “E” to enable CopperMountain fragmentation or type “D” to disable.
The IAD saves the configuration and displays the FR FRF.12 Configuration
menu. Press Escape to continue.
Set Real-Time DLCI
1
Type “2” to set up the IAD for real-time DLCI. The IAD displays the port
table and prompts you to select a port.
2
Type the port number corresponding to the DLCI you want to set to real-
time. The IAD saves the configuration and displays the FR FRF.12
Configuration menu. Press Escape to continue.
Configure Management Protocol
To configure Management Protocol, follow the steps below.
1
Type “2” on the Frame Relay Options menu to display the Configure
Management Protocol menu (Figure 4.48).
Figure 4.48
Frame Relay Management Protocol Menu
2
Type the number that corresponds to the protocol on your network and press
Enter.