Zhone 2000 ユーザーガイド
82
2 0 0 0 - A 2 - G B 2 3 - 0 0
Figure 4.51
Router Configuration Menu
You may sign on as Supervisor or Network Manager to configure the IAD as
a router. Options that display in the Router Configuration menu are the same
for both security levels.
a router. Options that display in the Router Configuration menu are the same
for both security levels.
Configure Port IP Address
To configure the IAD as a router, you must assign an IP address to both the
LAN and WAN ports, each with different subnet masks.
LAN and WAN ports, each with different subnet masks.
NOTICE:
You can assign up to eight IP addresses on each of the WAN and LAN
ports.
ports.
To configure an IP address, follow the steps below:
1
Type “C” on the Router Configuration menu (Figure 4.51) to select
Configure Port IP address. The IAD displays the available interfaces. Type
the number that corresponds with the interface you want to configure.
(Sample shown below in Figure 4.52.)
Figure 4.52
Available Interfaces Display.
2
The IAD displays the port table for this interface and prompts for a port.