Zhone 2000 ユーザーガイド

Type “Y” to confirm, or Escape to cancel. If you confirm, the Route Table 

is updated and the IAD prompts you to add more routes:

Type “Y” to add more routes, or Escape to cancel. Repeat these steps for 

each route that you want to add.

Continue with other configuration tasks, or press Escape to return to the 

Router Modification menu.

Remove a Route To delete a static route from the Route Table, follow the steps below:

On the Router Modification menu, type “R” to select Remove a Route. The 

IAD prompts you to enter the address of the route to remove:

Type the IP address of the route to remove and press Enter. The IAD 

removes the route from the table and the IAD displays the Router 

Modification menu. Repeat these steps for each route that you want to 

remove.

Continue with other configuration tasks, or press Escape to return to the 

Main menu.

To add or change a default route, follow the steps below.

On the Router Modification menu, type “F” to select Add/Change the 

Default Route. The IAD prompts you to enter the default gateway address. 

(You may type “0” for a list of interfaces):

Type the default gateway address and proceed to step 3 above or type “0” 

to display the port table.

Enter the number of the port and press Enter. The default route is set and the 

Route Table is will be updated when the IAD is reset.

Continue with other configuration tasks, or press Escape to return to the 

Router Modification menu.

Remove Default Route To remove a default route, follow the steps below.

On the Router Modification menu type “T” to select Remove the Default 

Route. The default route is immediately deleted and the Route Table is 

updated when the IAD is reset.

Continue with other configuration tasks, or press Escape to return to the 

Router Modification menu.

Display Route Table Type “D” on the Router Modification menu to display the Route Table.