Zhone 2000 ユーザーガイド

Each option on this menu is described in detail below.

When you enable DHCP Relay, you must provide a DHCP server IP address. 
To enable or disable DHCP Relay, follow the steps below:

On the DHCP Relay menu, type “E” to select Enable/Disable DHCP Relay. 

The IAD displays the current status and prompts you to change it.

Type “E” to enable DHCP Relay on this port, or “D” to disable it.

The IAD displays the current DHCP server IP address and prompts you to 

enter a new address.

Type the new DHCP Server IP address. The IAD saves the changes and 

displays the Router Configuration menu (Figure 4.51).

Continue with other configuration tasks, or press Escape to return to the 

Main menu.

To configure the DHCP Relay, follow the steps below.

On the DHCP Relay menu, type “C”. The IAD displays the current IP 

address and prompts you to enter a new address.

Type the new DHCP Server IP address. The IAD saves the changes and 

displays the Router Configuration menu (Figure 4.51).

Continue with other configuration tasks, or press Escape to return to the 

Router Modification menu.

To display information about DHCP, follow the steps below. 

Type “S” on the DHCP Relay menu (Figure 4.55). When DHCP Relay is 

enabled, the IAD displays a report such as the one below.

Press any key to return to the DNS Client menu when you have finished 

reviewing the information.