Zhone 2000 ユーザーガイド

On the Bridge Configuration menu (Figure 4.61), type “Q” to select 

Configure Spanning Tree Port Priority. The IAD displays the interfaces 

available on this IAD as shown in Figure 4.52 

Type the number of the interface for which you want to set the priority. The 

IAD displays a port table. If more than one interface is configured on the 

selected port, the IAD displays a list of interfaces:

Type the number of the port. The IAD prompts you to enter a priority for the 

selected Slot and Port.

Type the priority value and press Enter. The IAD updates the configuration 

and displays the Bridge Configuration menu.

Repeat these steps for each port on which you want to set the priority.

Continue with other configuration tasks, or press Escape to return to the 

Bridge Configuration menu.

To set the Spanning Tree hello time (a value between 1 and 10 seconds— 
default 2), follow the steps below:

Type “H” on the Bridge Configuration menu (Figure 4.61) to select 

Configure Spanning Tree Hello Time. The IAD prompts you to enter the 

Bridge Hello Time.

Type the value and press Enter. The IAD updates the configuration.

Press any key to return to the Bridge Configuration menu and continue with 

other configuration tasks.

To set the Spanning Tree maximum age, (a value between 6-40 seconds—
default 20), follow the steps below.

Type “S” on the Bridge Configuration menu (Figure 4.61) to select 

Configure Spanning Tree Max Age. The IAD prompts you to enter the 

Spanning Tree Max Age.

Type the maximum age value and press Enter. The IAD updates the 

configuration.

Press any key to return to the Bridge Configuration menu and continue with 

other configuration tasks.

To set the Spanning Tree forward delay (a value between 4-30 seconds—
default 15), follow the steps below.

Type “F” on the Bridge Configuration menu (Figure 4.61) to select 

Configure Spanning Tree Forward Delay. The IAD prompts you to enter the 

Spanning Tree Forward Delay.