Zhone 2000 ユーザーガイド
108
2 0 0 0 - A 2 - G B 2 3 - 0 0
Display Error Stats Type “B” to display the JetStream Voice Gateway error statistics.
Ring Test This command is reserved for use by Paradyne network engineers only.
Display IAD State Type “S” on the Call Control Settings menu (Figure 4.69) to display the on
hook state for each port. The IAD displays the following information:
Trace This option for use by Paradyne network engineers to configure Trace
settings.
Pick Sound Heard if
Insufficient WAN B/W
to Complete Call
1
Type “V” on the Call Control Settings (Figure 4.69) menu to select the
type of dial tone heard by the telephone user if there is insufficient WAN
bandwidth to complete a call. The IAD displays the Insufficient Bandwidth
Indication Setting menu (Figure 4.70) and the current setting:
Figure 4.70
Insufficient Bandwidth Indication Setting Menu
2
Type “0” to replace the dial tone with silence, or type “1” to replace dial
tone with a fast beeping sound.
3
Press Escape to return to the Call Control Setting menu and continue
configuration.
Zero ErrorStats Type “Y” on the Call Control Settings menu to reset the JetStream statistics.