Zhone 2000 ユーザーガイド
110
2 0 0 0 - A 2 - G B 2 3 - 0 0
Figure 4.73
CopperCom Configuration Menu
Each option on this menu is described in detail below.
Display Configuration
Type “D” on the CopperCom Configuration menu to display the current
configuration settings.tiple packets
Compression Format
To set compression globally or by port, follow the steps below.
1
Type “C” on the CopperCom Configuration menu to set the compression
format.
2
Type the port number, or type “0” to set the compression for all ports. The
IAD displays a port prompt.
3
Type the option for the selected compression. The IAD saves the changes
and redisplays the menu.
4
Press Escape to return to the CopperCom Configuration menu and continue
configuration.
Framing Format
1
1
Type “F” on the CopperCom Configuration menu to display a CopperCom
Configuration menu with Frame Relay Mode options:
Figure 4.74
CopperCom Configuration Menu with Frame Relay Mode Options
2
Type “1” to select a 36 octet packet, using a single packet per frame, or
type “2” to select a 44 octet packet, with multiple packets per frame. The
IAD saves the changes and displays the menu.
3
Press Escape to return to the CopperCom Configuration menu and continue
configuration.