Zhone 2000 ユーザーガイド
C o n f i g u r a t i o n
125
To access the Interworking feature, select “I” on the Main menu, which will
display the Connections menu shown in Figure 4.91.
Figure 4.91
Connections Menu
Select select “1” to add an Interworking Connection. The following menu
will be displayed:
Figure 4.92
Interworking Connections Menu
After making your selection, select the desired port from the next menu. You
will then select the appropriate ATM interface from the available WAN
interfaces and once again will select the desired port. At this point, you will
select either FRF5 or FRF 8 Interworking protocol from the menu as shown
below.
will then select the appropriate ATM interface from the available WAN
interfaces and once again will select the desired port. At this point, you will
select either FRF5 or FRF 8 Interworking protocol from the menu as shown
below.
Figure 4.93
Available Interworking Types Menu
When FRF.5 is selected, the ATM channel implements FRF.5 Network
Interworking, providing a Frame Relay link that can transport data for one or
more DLCIs. When FRF.8 is selected, the ATM channel implements FRF.8.1
Service Interworking, providing a conversion from a Frame Relay PVC to this
ATM PVC.
Interworking, providing a Frame Relay link that can transport data for one or
more DLCIs. When FRF.8 is selected, the ATM channel implements FRF.8.1
Service Interworking, providing a conversion from a Frame Relay PVC to this
ATM PVC.
FRF.5
If you select FRF5, the menu below will be displayed.