Zhone 2000 ユーザーガイド

ページ / 296
C o n f i g u r a t i o n
139
Show PIM Neighbor
1
Type “N” on the Multicast Configuration menu to display the PIM 
Neighbor. The IAD displays the neighbor for each interface and its 
expiration times.
2
Press any key to continue.
NAT Configuration
This section describes the steps required to configure Network Address 
Translation (NAT).
NAT multiplexes traffic from the internal network and presents it to the 
Internet as if it is from a single source that has only one IP address.
The NAT Local Server may be configured with a range of both TCP and 
UDP ports, which benefits applications including video conferencing and 
multi-user games.
Setting up IP networks without NAT may be complex—each requires an IP 
address, subnet mask, a DNS address and a default router. 
NAT reduces this complexity by
Modifying IP addresses and checksum without affecting traffic
Automatic network configuration when using DHCP
Packet-level filtering and routing
Traffic logging
NOTICE: 
If you enter an element of NAT information incorrectly, the network 
connection will not function and there may be no indication of what is 
wrong.
Refer to the NAT Application Note in Appendix C for further information.
 NAT Configuration
 
Menu
Enabling and managing NAT involves several tasks. These are all displayed 
and accessed on the NAT Configuration menu, which is displayed by typing 
“N” on the Main menu.