Zhone 2000 ユーザーガイド
C o n f i g u r a t i o n
147
Delete NAT Alias Entry
To delete a NAT alias entry, follow the steps below.
1
Type “Z” on the NAT Configuration menu. The IAD prompts for the alias
entry to delete.
2
Type the number of the entry and press Enter. The IAD updates the table,
and displays the NAT Configuration menu.
Setting PPP Options
When the IAD receives a TERM REQ from the upstream router, all PPP ports
are configured, including PPP over HDLC (USI or T1), PPP over ATM, PPP
over Frame Relay, and PPP over Ethernet over ATM. To access these PPP
options, follow the steps below.
are configured, including PPP over HDLC (USI or T1), PPP over ATM, PPP
over Frame Relay, and PPP over Ethernet over ATM. To access these PPP
options, follow the steps below.
1
Select “Q” on the Main menu to display the PPP Configuration menu
(Figure 4.104).
Figure 4.104
PPP Configuration
2
Select “D” to immediately restart PPP only after the IAD is ready to send
data upstream.
3
Select “I” to immediately restart PPP upon receipt of a TERM REQ from
the upstream router.
Setting Derived Timing Options
Use the Derived Timing options to enable and disable Derived Timing.
Derived Timing Menu
To configure Derived Timing settings, type “T” (Telephony Clock Recovery)