Zhone 2000 ユーザーガイド

Type “R” in the Reports menu to display the Route Table report. The IAD 

lists each route by IP address, and displays the information listed in the table 
below regarding statically configured routes and dynamically learned ones. 

Address Resolution Protocol (ARP) obtains the Ethernet Media Access 
Control (MAC) address for a known IP address.
Type “A” on the Reports menu to display the information shown in the table 

below about mappings between Ethernet Media Access Control (MAC) 
addresses (hardware addresses) and IP addresses. 

To display information about mappings between Ethernet addresses and 
devices connected to the LAN, type “B” on the Reports Menu. The IAD 

displays the shown in the table below. 

Network Address

destination address

Netmask

IP subnet mask; no. of bits reserved for the host ID

Gateway Address

IP address of packets sent to destination

Interface

IP address of outgoing interface

Metric

no. of hops (routers) required to reach the specified 
gateway

Type

static | dynamic | RIP | local

IP Address

IP address that corresponds to the MAC address

Ethernet Address

Ethernet address of the device; assigned by the 
manufacturer

Interface

The interface for the Ethernet address

Ethernet Address

Ethernet address of the device; assigned by the 
manufacturer

Interface

Interface for the Ethernet address

Port

Port for the Ethernet interface

Timer

No. of seconds until this entry deletes from the 
database. The time counts down from the bridge 
database aging time value, in one-second intervals; at 
zero, the entry deletes from the database.