Zhone 2000 ユーザーガイド
184
2 0 0 0 - A 2 - G B 2 3 - 0 0
ping Pings an IP address. The IP address must be on the same subnet. Press Escape
to premature halt the test. Upon termination, displays a summary table.
ping <IP address> (size) (tries)
IP address
IP address of destination in decimal format (999.999.999.999)
size
Packet size, in number of bytes (0-1450, default 32)
tries
Number of attempts (0-1000, 0 is continuous; default 4 tries)
IP address
IP address of destination in decimal format (999.999.999.999)
size
Packet size, in number of bytes (0-1450, default 32)
tries
Number of attempts (0-1000, 0 is continuous; default 4 tries)
quit Quits the command line interface and returns to the menu interface.
rename file Changes the name of a file.
rename file <old name> <new name>
old name
File name of existing file
new name
New name of file.
old name
File name of existing file
new name
New name of file.
reset system Performs a soft system reset.
reset system
Any time you use the menu or CLI to make setting changes, or change any of
the physical characteristics of the IAD (such as changing the MAC address of
the Ethernet port), you must reset (or restart) the IAD for the new settings to
take effect. An alternative to issuing the reset command is to simply turn off
(or unplug) the IAD, and power it back on, forcing it to reboot.
Any time you use the menu or CLI to make setting changes, or change any of
the physical characteristics of the IAD (such as changing the MAC address of
the Ethernet port), you must reset (or restart) the IAD for the new settings to
take effect. An alternative to issuing the reset command is to simply turn off
(or unplug) the IAD, and power it back on, forcing it to reboot.
NOTICE:
Rebooting the IAD terminates all telephone calls and data sessions in
process. Ensure that there are no services being rendered before you
reset the IAD.
process. Ensure that there are no services being rendered before you
reset the IAD.
remove lan ip
address
Removes the LAN IP address. If you do not enter any optional parameters,
the IAD locates and removes the first available slot, interface, port, and
connection.
the IAD locates and removes the first available slot, interface, port, and
connection.
remove lan ip address <IP address> <netmask> (slot)
(interface) (port) (connection)
IP address
IP address to remove, in decimal format (999.999.999.999)
netmask
Subnet mask in decimal format (255.255.255.255)
slot
Slot number (1 to 7)
IP address
IP address to remove, in decimal format (999.999.999.999)
netmask
Subnet mask in decimal format (255.255.255.255)
slot
Slot number (1 to 7)