Zhone 2000 ユーザーガイド

188

2 0 0 0 - A 2 - G B 2 3 - 0 0

port
Port number (0 to 7)

set lan stp

bridge

Enables or disables Spanning Tree Protocol on a LAN port.

set lan stp bridge <on | off> (slot) (interface)

(port)
on | off
Keyword to enable (on) or disable (off) STP on the specified port.
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)

set mgcp

bracketing

When communicating with the notified entity (call agent), indicates whether
the UDP port number should be wrapped in brackets for compatibility.

set mgcp bracketing <on | off>
on | off
Keyword to enable (on) or disable (off) MGCP bracketing.

set mgcp

listening port

Specifies the UDP port the Notified Entity (call agent) is listening on.

set mgcp listening port <port>
port
UDP Port number (any valid port number; usually 2427 or 2727)

set mgcp notified

entity

Specifies the DNS name or IP address of the notified entity (call agent). You
can specify one notified entity in the CLI. Use the menu interface to set up a
maximum of four call agents.

set mgcp notified entity <domain name | IP address>
domain name | IP address
Fully-qualified domain name or IP address of the call agent.

set mgcp

signaling

connection

Specifies the call agent slot, interface, port, and connection.

set mgcp signaling connection (slot) (interface)

(port) (connection)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl