Zhone 2000 ユーザーガイド

ページ / 296
A d m i n i s t r a t i o n
29
3
Continue with other SNMP settings, or press Escape to return to the Main 
menu.
4
Reset the IAD.
Enable/Disable SNMP via EOC
To Enable or Disable SNMP via EOC, follow the steps below.
1
Type “F” on the SNMP Configuration menu to enable or disable SNMP via 
EOC. The IAD displays the current status of SNMP.
2
To enable SNMP, type “E” or type “D” to disable. The IAD saves the 
configuration (if changed). 
3
Continue with other SNMP settings, or press Escape to return to the Main 
menu.
4
Reset the IAD.
Enable SNMP via Both IP and EOC
To Enable SNMP via Both IP and EOC, follow the steps below.
1
Type “A” on the SNMP Configuration menu to enable SNMP via IP and 
EOC. The IAD saves the configuration. 
2
Continue with other SNMP settings, or press Escape to return to the Main 
menu.
3
Reset the IAD.
Disable SNMP via Both IP and EOC
To Disable SNMP via both IP and EOC, follow the steps below.
1
Type “B” on the SNMP configuration menu to disable SNMP via IP and 
EOC. The IAD saves the configuration. 
2
Continue with other SNMP settings, or press Escape to return to the Main 
menu.
3
Reset the IAD.
Configure System Contact
To configure the System Contact, follow the steps below.
1
Type “P” on the SNMP Configuration menu to configure system contact 
(up to 39 alphanumeric characters). The IAD displays the current system 
contact and prompts you to enter a new one.
2
Type the name of the new contact person or department and press Enter. 
The IAD save the configuration. 
3
Continue with other SNMP settings, or press Escape to return to the Main 
menu.
4
Reset the IAD.