Zhone 2000 ユーザーガイド
A d m i n i s t r a t i o n
39
2
Type “Y” to delete the default.st file and save the current configuration
(stored in config.st) as custdef.st, a custom default configuration file.
The IAD saves the custom configuration file and displays the Utility menu.
Display Event Log
To display the event log, type “E”. The IAD displays the event log (sample
shown):
Figure 3.8
Event Log
Press any key to page through the log.
Clear “Last Reset Reason”
Under certain circumstances, the IAD is able to determine the reason the IAD
was reset. This information is stored and displayed when the IAD reboots, and
is also displayed on the Current Configuration screen (Displaying the Current
Configuration on page 8-206), when known.
After the reset reason is noted, you can delete the currently stored reset reason
from the IAD. To do so, type “A” on the Utilities menu. The IAD deletes any
was reset. This information is stored and displayed when the IAD reboots, and
is also displayed on the Current Configuration screen (Displaying the Current
Configuration on page 8-206), when known.
After the reset reason is noted, you can delete the currently stored reset reason
from the IAD. To do so, type “A” on the Utilities menu. The IAD deletes any
existing reset reason, and displays the Utility menu.