Zhone 2000 ユーザーガイド

Type “2” on the Main menu. The IAD displays the Router Configuration 

menu.

Type “C” to select Configure Port IP Address. The IAD displays the 

available interfaces, which depend on the specific IAD.

Select the option for the interface you wish to configure with the IP address. 

IP addresses already configured will be listed with an ID such as is shown in 

the example below. 

Type the ID number of the connection you want to configure and press 

Enter. To overwrite a listed IP address, select the corresponding ID number 

(in this case “0”). To add IP addresses on the interface, select a different ID 

number (in this case “1

−7”).

Type the new IP Address, and press Enter (or press Enter to retain the 

current IP address). The IAD displays the Current Subnet Mask and 

prompts you for a new one. 

Type the new Subnet Mask and press Enter. The IAD prompts you to select 

High or Normal priority.

To give the interface normal priority, type “N” or press Enter. Select “H” 

for high.

Type “Y” or Enter to save the new IP Address and Subnet Mask.

Reset the IAD as described below (also refer to Resetting the IAD on 

page 2-18) for the new IP address to be in effect.

The sections you’ll refer to in this manual for WAN configuration depend on 
the IAD model and the datalink protocol you choose.
Voice and data traffic are each carried in their own PVCs (ATM protocol) or 
DLCIs (Frame Relay protocol). You may define up to eight PVCs or DLCIs 
for voice and data.
For a voice circuit, a single PVC or DLCI can carry the voice traffic for all 
voice ports on the IAD. (Refer to Voice Path Configuration on page 4-101.)
First, identify your IAD and datalink protocol using the information listed in 
the tables below. Then, perform the tasks as directed.