Zhone 2000 ユーザーガイド
54
2 0 0 0 - A 2 - G B 2 3 - 0 0
2
Type the option corresponding to the DSLAM to which the IAD is
connected. The IAD automatically resets.
3
To continue configuration, log back onto the IAD.
Configure Physical Interface
− T1/E1
The tasks described in this section all begin on the T1 or E1 Configuration
menu. The tasks are described in order. Review and update each of the
options as necessary, and reset the IAD when you finish WAN configuration.
Type “2” on the WAN Configuration menu (Figure 4.4) to display the T1
menu. The tasks are described in order. Review and update each of the
options as necessary, and reset the IAD when you finish WAN configuration.
Type “2” on the WAN Configuration menu (Figure 4.4) to display the T1
Configuration menu (Figure 4.12).
Figure 4.12
T1 Configuration Menu
The top part of the menu displays the current configuration. You can change
the configuration by selecting the appropriate option in accordance with the
details provided below for each option. Remember always to reset the IAD
when you finish T1 configuration.
the configuration by selecting the appropriate option in accordance with the
details provided below for each option. Remember always to reset the IAD
when you finish T1 configuration.
Select Frame Mode (D4
or ESF)
To select the Frame Mode, follow the steps below.
1
Type “1” on the T1 Configuration menu (Figure 4.12) to select Frame
Mode (D4 or ESF) and display the T1 Frame Mode menu:
Figure 4.13
Select T1 Frame Mode Menu