Zhone 2000 ユーザーガイド
76
2 0 0 0 - A 2 - G B 2 3 - 0 0
2
Type the port number corresponding to the DLCI you want to delete. To
permanently remove the DLCI configuration, type “Y”. To cancel the
operation, type “N”.
Show Current DLCIs To display all currently configured DLCIs, follow the steps below.
1
Type “4” on the Frame Relay DLCI Configuration menu to display the port
table.
2
Press any key to display the Frame Relay DLCI Configuration menu.
Configure Frame Relay Options
To configure Frame Relay options, type “4” on the WAN Configuration
menu. The IAD displays the Frame Relay menu (Figure 4.44).
Figure 4.44
Frame Relay Options Configuration Menu
Each of the menu options is described in detail below.
Configure Fragmentation
1
1
On the Frame Relay Options menu, type “1” to display the Frame Relay
Figure 4.45
Frame Relay Fragmentation Configuration Menu
2
Type “1” to select Configure FRF.12 Fragmentation and proceed to
FRF.12 configuration.
− or −
Type “2” to select Copper Mountain Fragmentation and proceed to
CopperMountain Fragmentation configuration.
Each of these configurations is described below.
Frame Relay FRF.12
Configuration
Select FRF.12 Fragmentation to display the FRF.12 Configuration menu
(Figure 4.46).
(Figure 4.46).