Zhone 6212-a2 ユーザーズマニュアル

6212-A2-ZB23-10

6212-I2 4-Port Router User’s Guide

17

This chapter provides basic instructions for connecting the router to a 
computer or a LAN and to the Internet using DSL. The first part provides 
instructions to set up the hardware, and the second part describes how to 
prepare your PC for use with the router. 

It is assumed that you have already subscribed to DSL service with your 
Internet service provider (ISP).

Shut down your PC and any other equipment before connecting it to the 
router. To connect your router:

1 Verify that the router’s power switch is in the Off (outward) position. 

Verify that any PCs and other LAN devices you will attach (such as hubs 

or switches) are turned off.

2 Use the provided modular phone cable to connect the LINE jack of the 

router to your RJ11 wall jack.

3 Use the provided Ethernet cable to connect your computer to the router. 

Attach one end of the Ethernet cable to one of the LAN ports on the back 

of the router and connect the other end to the Ethernet port or Network 

Interface Card (NIC) in your PC. 
Connect any other PCs, hubs, and switches to the remaining LAN ports. 

Either a crossover or a straight-through Ethernet cable can be used: the 

router determines the type of signal required. 

4 Connect the cylindrical power plug into the POWER connector on the 

back of the device. Next:
— If you have a wall-mount adapter, plug the AC adapter into a wall 

outlet or a power strip. 

— If you have a table-top adapter, use the AC power cord to connect the 

adapter to a wall outlet or power strip. 

The supplied power adapter may look different than the one illustrated 

here.