Zhone 5100 参照マニュアル

ページ / 186
Vpacket 5100/6100 Series Reference Manual                                                                                                           A-11
Reformatting the 5100/6100 VDR
You can erase the contents of the 5100/6100 VDR by issuing the format command.
Caution. Version 2.0.3 and earlier of the FTP loader will remove all settings including 
the MAC address, default IP addresses, and part numbers for the hardware 
components. If you attempt to use this command, the unit needs to be returned to 
the manufacturer for repair.
FTP loader version 2.0.4 and later do not erase the MAC address and preset 
manufacturer’s assigned hardware component serial numbers.
Syntax: format
Example:
In this example, the 5100/6100 VDR is reformatted. All directory contents and preset 
information is erased from the 5100/6100 VDR. 
FtpLoader(1)> format
This will erase everything in the file system. OK? (y/n) y
Note: you must reboot after issuing this command
FtpLoader(2)>
FtpLoader(3)> reset
!