Zhone 5100 参照マニュアル

ページ / 186
APPENDIX A
FTP loader commands
A-22    
Vpacket 5100/6100 Series Reference Manual
Setting the main software image
You can choose which of the two software images will be the main image by issuing the set main 
command. If only one image is loaded, the image is placed in location number one and by default 
that image will be the main image. If two images are loaded and you want to the image that is 
currently not the main image to be the main image, then you can issue this command.
Syntax: set main [1|2]
Argument:
1 | 2
the location of the image that you want to use as the main (active) image
Example:
In this example, the 5100/6100 VDR is set to use image 2 when booting.
Setting the system time
You can set the system time by issuing the set time command. The time can be 12 hour or 24 
hour format.
Syntax: set time [hh mm ss]
Argument:
hh mm ss
the hour, minute, and seconds separated by single spaces
Example:
In this example, the current system time is changed to 20:17:30 (24 hour format). 
FtpLoader(7)> set main 2
FtpLoader(8)>
FtpLoader(21)> set time 20 17 30
FtpLoader(22)>