Zhone 5100 参照マニュアル
Navigation, memory, and file management
Vpacket 5100/6100 Series Reference Manual
35
set time
You can set the current system time for the 5100/6100 VDR by issuing the set time command.
Syntax: set time <hh:mm:ss> or set time <hour hh minutes mm seconds ss>
Arguments:
Syntax: set time <hh:mm:ss> or set time <hour hh minutes mm seconds ss>
Arguments:
hour = (0-24)
minute = (0-60)
seconds = (0 - 60)
minute = (0-60)
seconds = (0 - 60)
Example:
In this example, the time is set to be 5:41:30 in the morning.
Viewing information
The show commands display information in the current configuration. Like the set commands,
the show commands give access to both same-level commands and additional submenus of
choices.
show changes
You can view any changes made (but not yet saved) to the configuration file by issuing the show
changes command.
Syntax: show changes
Example:
Syntax: show changes
Example:
In this example, the FTP filename was changed twice, the FTP IP address was changed and the
WAN IP address and subnet mask were changed.
VPacket# set time 05:41:30
VPacket#
VPacket# show changes
Changed configuration items:
Changed by Name of item Setting
Console ftpFileName first.bin
Console ftpFileName config2.cfg
Console ftpIpAddress 172.16.1.231
Console wanSubnetMask 255.255.255.240
Console wanIpAddress 172.57.35.6
VPacket#