Zhone 5100 参照マニュアル
SDSL WAN commands
Vpacket 5100/6100 Series Reference Manual
83
Example 2:
In this example, the SDSL WAN encapsulation is set to 1483Routed to interoperate with a Lucent
Stinger. You also need to commit and save the changes and then reset the unit.
Configuring the WAN data protocol
You can set the WAN data protocol to interoperate within your network by issuing the set wan
data protocol command. The choices of protocols include: funi, atm, ppp, and mlppp. Funi
provides users with the ability to connect among ATM networks and existing frame-based
equipment (such as routers and Copper Mountain DSLAMs and T1 aggregators). You will only
be able to view the data protocols that are applicable to your VDR model.
Syntax: set wan data protocol <ppp | mlppp | funi | atm>
Argument:
Syntax: set wan data protocol <ppp | mlppp | funi | atm>
Argument:
ppp | mlppp | funi | atm
funi supports Copper Mountain T1 aggregator interoperability; atm supports
Lucent Stinger SDSL interoperability; ppp is available for models that have one or
two T1 WAN ports; mlppp is available for models that have two T1 WAN ports
Example 1:
In this example, the SDSL WAN interface is configured to support Copper Mountain DSLAM
interoperability. You also need to commit and save the changes and then reset the unit.
Example 2:
Example 2:
In this example, the SDSL WAN data protocol is set to ATM for Lucent Stinger interoperability.
You also need to commit and save the changes and then reset the unit.
VPacket# set wan encap 1483Routed
VPacket# save
VPacket# reset
VPacket# set wan data protocol funi
VPacket#
VPacket# set wan data protocol atm
VPacket#