Zhone 5100 クイック設定ガイド

e. Set the FTP filename by issuing the set ftp filename command and entering the file name.

Example:

4. Change to the maincode directory by issuing the cd maincode command. 

Example:

5. When you are in the maincode directory, issue a dir command to discover the code version.

Example:

6. Issue the download image command and enter the filename to start downloading the software 

image. 
Example:

Note. You can request that the file be used and active during the next reset by issuing the 

download image <filename> requestactive command.

7. Issue dir to verify that the code is now downloaded in \maincode.
8. Reboot the VDR by issuing the reset command from the CLI.

VPacket# set ftp filename new_code.bin

VPacket#

VPacket# cd maincode

Changed to directory maincode

VPacket# dir

Directory of \maincode

 3/ 10/2002   0: 0: 0    <DIR>

 3/ 10/2002   0: 0: 0    <DIR>

 3/ 10/2002   1:31:50   1262450 OLD_CODE.BIN

  3 File(s)            1262450 bytes

Remaining file system bytes: 552448

VPacket# download image new_code.bin

 download of new_code.bin to new_code.bin

download# ...................

File new_code.bin successfully downloaded from new_code.bin

VPacket#