Zhone 5100 インストールガイド
CHAPTER 4
Configuring a VDR
Configuring a VDR
50
Vpacket 5100/6100 Series Installer’s Guide
To upload a configuration file from the VDR to a remote host
You can follow these steps to upload a configuration file to a remote host.
Note. Prior to issuing the upload command, you need to verify that the FTP
settings are correct. To check the FTP settings, you can issue the show ftp
command.
1. Access the CLI at the main configuration level.
2. Issue upload configuration [filename_source] <hostname or IP address>
2. Issue upload configuration [filename_source] <hostname or IP address>
<filename_target>
3. Verify that the remote host received the transferred file.
Further configuration
This chapter described the basic configuration procedures. To configure the loopback interface,
default gateway, IP multinetting features or other IP services, see the Vpacket 5100/6100 Series
Voice/Data Router Reference Manual Data Features.
default gateway, IP multinetting features or other IP services, see the Vpacket 5100/6100 Series
Voice/Data Router Reference Manual Data Features.