Zhone 6210 ユーザーガイド

2. Hardware Installation and PC Setup

 

5. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button 

labeled “Use the following IP address” and type 192.168.1.x (where x is any 
number between 2 and 254) in the IP Address field. Type 255.255.255.0 in the 
Subnet Mask field.

 

6. Click on OK twice to confirm your changes, and close the Control Panel.

To configure the IP address under Windows 2000:

1. In the Windows task bar, click on the Start button, point to Settings, and then 

select Control Panel.

2. Double-click on the Network and Dial-up Connections icon.

3. In the Network and Dial-up Connections window, right-click on the Local Area 

Connection icon, and then select Properties.

The Local Area Connection Properties dialog box is displayed with a list of 
currently installed network components. If the list includes Internet Protocol 
(TCP/IP), the protocol has already been enabled, in which case you can skip 
to